Glass Picture Frames
MEMORIES M Multicolor by RAGAZZI
Preserve your precious memories in a Murano glass frame to make them even more spacial: these splendid rectangular frames, with coloured glass chip mosaic, gold leaf and plexiglass base and back, are perfect for the job.
The collection includes four colour combinations (multicoloured, black and white, red and white, blue and light blue) in four different sizes (extralarge, large, medium, small) to fill any need.
Wonderful gift idea to surprise your recipient with a unique, exclusive gift.
"MURRINO" GLASS or HOT-WORKED MOSAIC
The hot-worked glass mosaic is based upon glass canes; they are produced in very few furnaces, due to the complexity of its manufacturing.
The master picks up a cylindrical mass of molten glass (the "paston") with the cane-making rod, and joins it to a smaller blob (the "conzaura") attached to a short rod. He then hands over one of the rods to his assistant, then they slowly walk away from each other lengthening the glass rope.
As the glass quickly cools, they carefully set down the hardened cane onto rough wooden boards on the floor. The evenness of the cane depends exclusively on the superior craftsmanship of the master. A special type of cane is called "millefiori"; it is a hollow or solid cane composed of concentric multicoloured layers which, in cross-section, form a typical star- or flower-shaped pattern.
These canes are produced by filling open moulds in succession, creating each pattern by layers of different-coloured glass. The finished cane is used by cutting into small segments and arranged onto a horizontal metallic plate, coated with purified lagoon-marsh mud -- this is the only substance able to isolate melting glass from metal. The arrangement is melted inside an oven and picked up for further processing, usually blowing and shaping with tongs. It is this initial procedure that determines the pattern and size of the object, whether one uses solid canes, geometric plates, filigree or aventurine, and creates an infinite variety of unique products.
GOLD OR SILVER LEAF
Precious metal leaves are extremely thin sheets of metal, usually made of pure gold or silver. In glassmaking, the imperceptibly light leaves need to be kept in a sheltered area of the furnace workshop, as even a breath might blow them away.
The gold or silver leaf is gently arranged on a flat surface by the master, who then rolls the incandescent blob over the leaf to pick it up; the metal leaf adheres perfectly to the surface of the glass, which is now ready to be blown. Upon blowing, the sheet of precious metal splits to spread over the entire surface of the glass object.
The final product therefore appears to be covered in a fine gold or silver dust.